Best Magnetic Fractional Plates for Your Gym Barbell
The best best magnetic fractional plates for gym barbells is the Magnetic Fractional Weights 1.25lb set, a four-plate kit that adds 5 lb total in the smallest jump most lifters actually need. It's the pick for anyone whose program calls for 1.25 lb per side without extra clips or fiddling.
Want a wider spread of tiny increments instead? The EVERYMATE Fractional Micro Weight Plates 8 gets you there, as long as you're fine keeping track of eight small plates instead of four.
As an Amazon Associate, I earn from qualifying purchases.
Below you'll find the part most roundups skip: which buyers should walk away from magnetic plates entirely, and how magnet grip and stated weight tolerance actually behave across a training block.
Everything here comes from current Amazon product data, manufacturer specs, and each listing's owner track record, not hands-on lab testing. You can read about how we put these guides together if you want the full picture.
Quick Answer: The Best Magnetic Fractional Plates for Gym Barbells
The Magnetic Fractional Weights 1.25lb set leads because four matched 1.25 lb plates cover the smallest jump most barbell programs call for, with nothing extra to buy.
- Magnetic Fractional Weights 1.25lb (5lb total) (Best overall): four matched 1.25 lb plates for clean two-plate jumps.
- EVERYMATE Fractional Micro Weight Plates 8 (Best for tiny increments): eight plates across four sizes for 0.25 lb steps.
- Micro Gainz 1.25LB Dumbbell Fractional Weight (Best for dumbbells): four 1.25 lb plates sized for dumbbell handles.
- PlateMate Microload Pair Magnetic Weights (Best trusted name): a long-running pair in 1.25 lb or 2.5 lb.
- Micro Gainz 2.5LB Dumbbell Fractional Weight (Best for bigger jumps): two 2.5 lb plates when 1.25 lb feels too small.
Thinking about skipping magnetic plates and building a full setup instead? Jump to Who Should NOT Buy below before you spend anything.
Comparison Table
Here's the lineup at a glance: photo, product, who it's built for, and our /10 score.
| Photo | Product | Best for | Score | Buy |
|---|---|---|---|---|
![]() | Magnetic Fractional Weights 1.25lb (5lb total) | Overall barbell microloading pick | 9.2/10 | Check price → |
![]() | EVERYMATE Fractional Micro Weight Plates 8 | Tiny 0.25 lb increments | 8.9/10 | Check price → |
![]() | Micro Gainz 1.25LB Dumbbell Fractional Weight | Dumbbell micro jumps | 8.7/10 | Check price → |
![]() | PlateMate Microload Pair Magnetic Weights | Trusted classic pair | 8.3/10 | Check price → |
![]() | Micro Gainz 2.5LB Dumbbell Fractional Weight | Bigger 2.5 lb step | 7.9/10 | Check price → |
Scroll sideways on small screens to see every column.
Magnetic Fractional Weights 1.25lb (5lb total): Best Overall for Barbell Microloading
EVERYMATE Fractional Micro Weight Plates 8: Best for Tiny Increments
Micro Gainz 1.25LB Dumbbell Fractional Weight: Best for Dumbbell Micro Jumps
PlateMate Microload Pair Magnetic Weights: Best Trusted Name in Microloading
Micro Gainz 2.5LB Dumbbell Fractional Weight: Best for Bigger Micro Jumps
Buying Guide: Increment Size, Magnet Grip, Plate Shape and Durability
A magnetic fractional plate is a small steel weight with a magnetized face that sticks to the side of a barbell plate or dumbbell head, letting you add less than the standard 5 lb jump. Four things decide whether a set actually works for you.
How small a jump do you actually need?
Look at your program's prescribed progression before you buy anything. Linear plans that add 2.5 lb per session to a press are served fine by the Magnetic Fractional Weights 1.25lb set. Percentage-based plans running 2.5% weekly steps on a heavy squat often need 0.25 to 0.5 lb, which is where the EVERYMATE eight-piece earns its keep.
The mistake we see most in buyer reviews is ordering a set that can't make the jump the program calls for. A 5 lb total kit can't produce a 1 lb step if every plate weighs the same. Size variety matters more than total weight.
Why magnet strength drops faster than you'd expect
Magnet grip degrades the moment chalk dust, rust flakes or fine grit gets between the plate and the surface. It's not a defect, it's basic contact geometry: any gap reduces holding force. Wiping both the plate face and the magnet face every few sessions is the single easiest fix.
It also explains why rubber-coated dumbbell heads hold worse than bare iron or chrome. Verified buyer feedback on rubber-head dumbbells consistently reports weaker adhesion, and that's a materials issue you can't train around. For calibration and tolerance work generally, NIST's weights and measures program is the reference standard bodies point to.
Plate shape changes what you can load
Barbell sleeves like a flat plate face. Dumbbell heads like a narrower profile that won't shift when you set the weight down on your thigh. This is why the Micro Gainz 1.25LB set behaves so differently from a barbell-only kit.
Hex shapes resist rolling on a bench but take up more bag space.
If you train both barbell and dumbbell work in the same session, one kit alone rarely covers it. Most experienced lifters end up with two sets for exactly this reason.
What actually breaks these things
Not much. The steel plates outlast every other piece of gym gear you own. What does wear is the coating, and the magnet face slowly picking up grit.
A few buyers report surface scuffs from sliding plates across each other instead of setting them down. Set them down, wipe them off, and a set should outlast your gym membership.
Who Should NOT Buy Best Magnetic Fractional Plates for Gym Barbells
Magnetic fractional plates are the wrong purchase for a few specific kinds of buyers. Here's who they are, and what to look at instead.
You need more than 5 lb of incremental capacity
These sets top out at 5 lb total per kit. If your training block needs 10 or 15 lb of fine adjustment across a session, you'd need three kits, and at that point you're spending real money on a stopgap.
Look at a full calibrated plate set or adjustable dumbbells instead. The weights worth buying for a small home gym are a better place to start.
You lift on machines or cables
Magnetic plates need a flat ferrous surface to stick to. A cable stack, a selectorized machine, and most plate-loaded rigs don't give you one. You can't microload a lat pulldown with a magnet.
For machines, your options are magnetic pin weight add-ons designed for the stack, or just accepting the machine's built-in increment. It's a different product entirely.
You don't own the plates they stick to
Magnetic fractionals are accessories, not standalone weights. If you train at a commercial gym with rubber-coated plates and rubber-coated dumbbells, adhesion will be inconsistent at best.
If you don't own your plates, borrow a set from the gym first. If that's not possible, a pin-loaded cable stack or a belt squat machine often offers finer increments than a barbell anyway.
Final Verdict
The Magnetic Fractional Weights 1.25lb set is the pick because four matched plates solve the most common progression problem without asking you to think about it. Simple, matched, and the easiest to load mid-set.
Want the finest available jump? Get the EVERYMATE Fractional Micro Weight Plates 8. Eight plates down to 0.25 lb is the smallest honest step a barbell can take.
Training dumbbells instead? The Micro Gainz 1.25LB four-piece has the strongest owner rating in this lineup for a reason. And if you already know your jump size and want a buy-once pair, the PlateMate Microload pair has been doing this longer than anything else here.
Before you buy, read the Who Should NOT Buy section above. If you're in one of those three groups, none of these plates will fix your actual problem.
FAQ
What's the best Magnetic Fractional Plates for Gym Barbells overall?
The Magnetic Fractional Weights 1.25lb set, because four matched 1.25 lb plates cover the standard 2.5 lb per-side progression without any extra hardware. A reported 4.5/5 rating and a 5 lb total make it the safest first purchase.
How much weight do magnetic fractional plates actually add?
Each plate adds its stated weight, so a 1.25 lb plate adds 1.25 lb per side. Use two and you've added 2.5 lb to the bar. The catch: your smallest possible jump equals your smallest plate, which is why sets with varied sizes adjust finer than matched sets.
Will magnetic plates stay on during a heavy squat or bench?
On bare iron or chrome plate faces, yes, and buyer reports are consistent on this. On rubber-coated or urethane-coated faces, holding force drops meaningfully. Clean both surfaces and set the plate down rather than sliding it off.
Do magnetic fractional plates work on dumbbells?
Some do, if they're shaped for dumbbell heads. The Micro Gainz 1.25LB and 2.5LB sets are both built this way. Barbell-only plates sit awkwardly on a dumbbell head and can shift.
Can I use these on a cable machine?
No. Cable stacks and selectorized machines don't give the magnet a flat ferrous surface to grip. You'd need a stack-specific add-on, or you accept the machine's built-in increment.
Are they worth buying if I train at a commercial gym?
Only if your gym's plates are bare metal. If everything on the racks is rubber-coated, adhesion will be hit or miss. Check the plates you actually lift with before spending anything.
Looking for the fine print on how we handle links and disclosures? Our affiliate disclosure and full disclaimer lay it all out.























